Fillmore County Fair Tractor Pull
July 24th – 6:30 p.m.
Registration starts at 5:30, Driver Meeting at 6:15, first class starts at 6:30
**Announcements day of pull take precedent over any printed material**
Pulling order is subject to change
Farm Tractor Classes
| #5500, 6500, 7500 | 4 MPH | (Max tire size 16.9 x 38) |
| #8500, 9500 | 6 MPH | (Max tire size 18.4 x 38) |
| #10,500, 11,500, 12,500 | 6 MPH | (Max tire size 18.4 x 42, 20.8 x 38, or 24.5 x 32) |
Pressed steel allowed, factory stock size tires and rims (front and rear) – bias and radial tires allowed. Factory stock engines, carburetors, injector pumps, RPM’s 1% over factory specs. No cut tires. Working hydraulics and PTO. Two-point hitches NEED to be pinned securely in position. Maximum – 20-inch drawbar height and 24 inches back from center to axle to drawbar. Twisted Clevis ONLY. Weights must be secured properly. Engine side shields advised. FENDERS REQUIRED ON TRACTORS #8500 AND UP. Turbos are allowed in classes #10,500 and up.
Sportsman Classes
| #5500, 6500 | 10 MPH | Max tire size 18.4 x 38 |
| #8500, 9500, 10,500, 11,500 | 10 MPH | Max tire size 18.4 x 42, 20.8 x 38, or 24.5 x 32 |
Radial or bias tires allowed. Cut tires allowed. Re-powered engines allowed. Single fuel ONLY. Water injection allowed. Twisted clevis or loop drawbar with 3 – 3 ½ inch opening – 20-inch height and 18 inches back from the center of axle to drawbar. Wheelie bars not more than 10 inches off the ground. Turbo limit of 2.3-inch intake. Weights secured properly. RPM’s 10% over factory, 2900 max. FENDERS AND SOLID ENGINE SIDE SHIELDS ADVISED ON ALL TRACTORS
Pro Farm Classes
| #7800, 8600, 9600, 10,600 | ~15 MPH | For Pro Farm classes, contact Tom Shatek (641) 330-0951 |
Cash payback in all classes 1st – 3rd 1st $50/ 2nd $30/ 3rd $20
Additional cash prizes for the following classes:
Must have 3 tractors in class to qualify for additional cash prize
- All Pro Farm classes
- 1st $75/ 2nd $50/ 3rd $25
- Farm #6500, 10,500, 11,500
- 1st $50/ 2nd $25
- Sportsman #8500, 11,500
- 1st $50/ 2nd $25
Pull Order
| Weight | Division | Max MPH | |
|---|---|---|---|
| 1 | 5500 | Sportsman | 10 |
| 2 | 5500 | Farm | 4 |
| 3 | 6500 | Sportsman | 10 |
| 4 | 6500 | Farm | 4 |
| 5 | 7800 | Pro Farm | 15 |
| 6 | 7500 | Farm | 4 |
| 7 | 7500 | Sportsman | 10 |
| 8 | 8600 | Pro Farm | 15 |
| 9 | 8500 | Farm | 6 |
| 10 | 8500 | Sportsman | 10 |
| 11 | 9500 | Farm | 6 |
| 12 | 9500 | Sportsman | 10 |
| 13 | 9600 | Pro Farm | 15 |
| 14 | 10500 | Farm | 6 |
| 15 | 10500 | Sportsman | 10 |
| 16 | 11500 | Farm | 6 |
| 17 | 11500 | Sportsman | 10 |
| 18 | 10600 | Pro Farm | 15 |
| 19 | 12500 | Farm | 6 |
General Safety Requirements
Driver will be disqualified if: not seated at all times, anything falls off of the tractor while on the track, or the driver is assumed to be intoxicated. All Youth Drivers MUST have a kill switch.
No Duals (Except for 4-wheel drive and MFWD classes) or chains allowed. All Exhibition pulls will be last in each class. First hook in the class does not have the option to repull UNLESS specified by the sled operator, or to settle full pulls. 75 Feet option for all pullers. If you go over the speed limit in speed limited classes, finish your pull at the required speed limit for the class.
Front of weights must be no further than 13 feet ahead of the center of the rear axle. Limit for 1959 and older tractors is 11 feet. Drawbar must be visible when backed up to skid for hooking.
Maximum of 100 pounds allowance overweight at scale allowed for each class. All pullers must weight at scales provided by sponsoring organization and go across scales before hooking in their class.